Why It Makes Perfect Sense to Opt for Muzzle Brakes to Enhance Your Shooting Experience

Muzzle brakes work just fine as it diverts combusting gasses, harness the energy to reduce recoil, and works like it should by capturing and diverting most gasses that would normally flow backward.

The diversion you’ll experience, even on long barrels that measures at 5.56 is well over 5,000 PSI of pressure. The only problem is when you’re making use of handguard, the pressure is not all that favorable as it acts on handguards, and even broke some aluminum handguards that are not meant to cope with this amount of pressure.

What is more, your hand will fare far worse as the soft tissue may get damaged as a result. The way to work around this issue when making use of the best ar 15 compensator handgun is to ensure all ports of your brake go past the handguard. Having said that, while this would eliminate the fracturing of the aluminum handguard, there is still the issue that it goes past the safe zone that is suited for human manipulation. In our opinion, it is not such a good idea to deploy a handguard that will in effect not safeguard your hand from the muzzle blast.

Newly Released Muzzle Brakes That Make a Difference in One’s Shooting Experience

Just recently, Crux Ordnance released their first muzzle brake that is branded as “CruxOrd Muzzle Brake.” It’s been said to be one of the most advanced brakes currently. Overall, these guys are known for producing a range of top quality firearm accessories, of which most of these are made in house. Some of the products they have include mag releases, guide rods, thread protectors, and muzzle brakes.

Apparently, their muzzle brakes feature a double helix baffle that redirects the gasses to counter muzzle climb and counter recoil. The full-length lanes intersect each one of the baffles to ensure proper gas volume control and sufficient cooling. Each brake is precision machined and finished by hand. They are made in black but are not suppressor adaptable.

In a similar way, the Triple-Port Muzzle Brake by MadHouse Design has the edge in that it stays on target and is engineered with performance in mind, which can be seen with its compact and sleek design. It offers a substantial performance improvement concerning fast and accurate shooting. What is more, their model laterally distributes any excess gasses through its three precision ports that result in minimal muzzle rise, blowback, and an effective recoil reduction. The solid bottom section of the muzzle brake ensures minimal dust signature during various shooting conditions. Then again, their ports do not face upward so the shooter may experience an uninterrupted view of their target even during muzzle flash.

MadHouse Design precision machined their brakes by making use of 303 stainless steel to ensure it can stand up against corrosion of any sort. Their brakes are made available in 5 finishes and five calibers to accommodate various rifle configurations.

Click here for the best ar 15 muzzle brake for hunting.

Installing a Muzzle Brake

Installing muzzle brakes cannot be easier. The way to do it is to make use of an AR15 Combo Tool made by Wheeler Engineering so you can unscrew the flash hider if equipped with one, then thread and tighten your brake by hand as far as you can take it.

To finish off, you need to make use of an adjustable wrench, so you may tighten the brake until it’s level enough. A huge plus with MadHouse Design brakes is the flat bottom surface as it makes it so much easier to tighten up. We suggest you make use of a cloth between the wrench and the brake to preserve the good condition of the brake.

The best thing about using a muzzle brake is the significant reduction in recoil you’ll experience with virtually no muzzle climb. What is more, shooters who do not have a proper bracing stance will love the significantly reduced bounce back of the rifle from having a brake installed. Another huge plus is the minimal blast one would feel when using a MadHouse Design brake as opposed to traditional muzzle brakes.

If you are a hunter, competitor, or recreational shooter who depends on successful follow-up shots, then you should seriously consider having your hunting rifles fitted with a muzzle brake by MadHouse Design. It may very well be one of the finest on the market nowadays.